Arcam Solo movie 2.1 User Manual (English)

Other manuals for Arcam Solo movie 2.1

Questions and Answers:

N
nbarajasAug 10, 2025
How to fix no video (blank screen) on Arcam Receiver?
- K
  Katelyn CooperAug 10, 2025
  If your Arcam Receiver displays a blank screen, first ensure the HDMI cable is securely connected at both the receiver and the display device. Verify that your display device is set to the correct HDMI input, and that the HDMI input on both the receiver and display device is enabled. As an alternative, use another video display device connected via composite video out to check the ‘Video Resolution’ on the Video page. Finally, check your display device's user manual to confirm it supports the output formats from the receiver.
J
Jordan HolmesAug 18, 2025
What to do if Arcam Receiver shows no video (random noise)?
- C
  Cody JonesAug 18, 2025
  If your Arcam Receiver shows random noise instead of video, it might be due to the content-protection algorithm failing to authenticate the connected device. To resolve this, remove all discs from the receiver, then power off both the receiver and the connected display device. Power on the display device first, followed by the receiver. If the noise appears when playing a copy-protected DVD, the authentication is failing. Please contact your dealer for further information.
P
Patricia SmithAug 26, 2025
Why is compressed audio not playing on my Arcam Receiver?
- A
  Andrew AllenAug 26, 2025
  If your Arcam Receiver is having trouble playing compressed audio, ensure that you are using compatible files. The receiver supports CD- or DVD-ROM discs (MP2), MPEG1 Audio Layer 3 (MP3), Windows Media file (WMA) and OGG formats, with sampling rates of 44.1 or 48kHz. It's recommended to use fixed bit-rate files. Variable bit-rate (VBR) files are playable, but the playing time display might be incorrect. Also, the receiver only recognizes tracks with the file extensions ‘.mp3’, ‘.wma’, ‘.mp2’, and ‘.ogg’ (names are not case-sensitive).
E
Eddie GonzalezSep 2, 2025
How to ensure CD-R/RW and DVD-R/RW compatibility with Arcam Receiver?
- T
  timothy01Sep 2, 2025
  To ensure compatibility of CD-R/RW and DVD-R/RW discs with your Arcam Receiver, use discs recorded in CD Audio or Video CD/Super VCD format, or as a CD-ROM containing compatible audio and video file types. For DVD-R/RW discs, use the DVD Video format, or a DVD-ROM containing compatible audio and video file types. The player is compatible with multi-session discs, but it plays only sessions that are closed. Make sure that file names do not contain blank spaces or special characters (.+/=). For CD-ROM or DVD-ROM discs, ensure that they are ISO 9660 Level 1 or Level 2 compliant.

Arcam Solo movie 2.1 Specifications

General

Speaker Configuration	2.1
Frequency Response	35Hz - 20kHz
Audio inputs	Analog, Digital (optical)
Audio outputs	Subwoofer output
Video outputs	HDMI
Frequency Response (Revised)	35Hz - 20kHz
Outputs	Subwoofer output
Disc formats	CD, DVD
Connectivity	Analog, Digital (optical)
Inputs	Analog, Digital (optical)