To Next Page
J
Jose SimonAug 3, 2025
What to do if Arcan Jacks unit will not lower completely?
- DDanielle HarringtonAug 3, 2025
If the unit will not lower completely, check the oil level. Ensure that the unit is not overfilled with oil.
What to do if Arcan Jacks unit will not lower completely?
If the unit will not lower completely, check the oil level. Ensure that the unit is not overfilled with oil.
What to do if Arcan Jacks unit will not lift load?
If the unit will not lift a load, purge air from the hydraulic system. Follow the procedure outlined under the SETUP section to complete this process.
How to fix Arcan XL35R unit if it will not lift to full height?
If the unit will not lift to its full height, purge air from the hydraulic system, using the procedure described under SETUP.
Why does the handle tend to raise up while the Arcan XL35R Jacks unit is under load?
If the handle tends to raise up while the unit is under load, rapidly pump the handle several times. This action should push oil past the ball valves in the power unit, resolving the issue.
Why Arcan Jacks unit will not sustain load or feels “spongy” under load?
If the unit will not sustain a load or feels “spongy” under load, purge air from the hydraulic system. Follow the procedure as described in the SETUP section.
Essential directives to read and understand before operating the lifting device.
Discussion of inherent hazards in portable automotive lifting devices and the need for user competence.
Key safety practices and precautions to prevent injury and damage during jack operation.
Explanation of potential severe outcomes from failing to follow safety instructions and methods.
Instructions for assembling the two-piece handle and attaching it to the jack yoke.
Step-by-step procedure to remove trapped air from the hydraulic system before use.
Detailed steps for safely raising and lowering a vehicle using the jack and jack stands.
Recommendations for storing, cleaning, lubricating, and inspecting the jack for longevity.
An itemized list of available replacement parts with corresponding part numbers and quantities.
Key technical data for the jack, including load capacity, heights, reach, and weight.
A guide to identifying and resolving common issues encountered during jack operation.
Details on the product's warranty coverage and contact information for support.
General| Model | XL35R |
|---|---|
| Category | Jacks |
| Weight | 99 lbs |
| Material | Steel |
| Capacity | 3.5 Ton |
| Maximum Height | 21.5 inches |
