2
Avoid installing the machine in an environment with dust or metal powder;
Avoid installing the machine in an environment with corrosive or explosive gas;
Ensure that the working environment is between -10°C and 40°C. If it is used in an environment higher
than +40℃, additional forced cooling measures or derating should be taken;
It should be used in an environment where the humidity is less than 90% and there are no condensation
water beads;
Please make sure that there is no wind on the welding side. Use a windshield if necessary; otherwise, it
will affect the welding quality.
Please consult and confirm with experienced personnel first for any special Installation requirements.
1.2 Operation Precautions
Only qualified personnel should operate this machine!
Always use the appropriate personal protective equipment.
The operator shall be a special operator with a valid "Metal Welding (Oxygen
Cutting) Operation" certificate.
Do not carry out any maintenance with the power on the machine
Fumes and gases may be hazardous to your health!
Welding may produce hazardous fumes and gases. Do not breathe the
welding fume.
Keep your head out of the welding fume, and ensure the welding zone is
provided with ventilation or fume extraction system.
Arc rays may injure the eyes and burn the skin!
Use a suitable welding helmet and wear protective clothing to protect your
eyes and body.
Use adequate helmet or protective screens to protect others from injury.
Magnetic field affects cardiac pacemaker
Pacemaker users should consult a doctor before performing welding
operations.
Stay away from welding power source to reduce electromagnetic interference.
Improper use and operation may cause fire or explosion
Welding sparks may cause fire. Please confirm that there are no combustibles
near the welding station and pay attention to safety and fire prevention.
Ensure that there are fire extinguishers nearby and that a trained person can
skillfully use the fire extinguisher.
Do not weld closed containers.
It is forbidden to use the machine for pipeline thawing.
Hot weldments can cause severe burns
Do not touch any hot surfaces or parts bare handed.
Always allow the welding gun to cool down when using it continuously.
Digital Welding Expert, Know You More
https://www.arccaptain.com
To Next Page
