3
Pulse / AC / DC
Rated welding current
Gas tungsten arc welding
Moving parts may cause personal injury
Keep away from moving parts (such as fans).
Protective devices such as doors, panels, covers and baffles shall be tightly
closed and in place.
Seek professional help when encountering problems
If you still do not fully understand or cannot solve the problem after reading
the instructions in this manual, you should contact the supplier service
center immediately for professional help.
1.3 Scrap Disposal
Please pay attention to the following when scraping the welder:
Igniting electrolytic capacitors on the main circuit or circuit board can cause an explosion;
The machine belongs to industrial waste.
2. Product Overview
2.1 Product Model Description
TIG 200PACDC
2.2 Product Feature
2.2.1 Machine Overview
TIG200PACDC is a fully digital 7 in 1 inverter AC/DC welder with complete functions, excellent performance
and advanced technology. It supports AC TIG (square wave/triangular wave), AC pulse TIG, DC TIG, DC pulse
TIG, SMAW (DC), argon arc spot welding (DC/AC), etc.
It can be widely used in precise welding of carbon Steel, Stainless Steel, Aluminum etc, good performance in
thin Aluminum plate.
The unique “Dash-Arc” technology patent improve arc striking speed from 200ms to 40ms, 99.99% arc striking
success rate.
Digital control system makes TIG200PACDC more reliability and stability, it could adjust more parameter to
promote good performance within one LED display, such as adjustable pre-flow\Initial current\ Up-slope\ Peak
current\ Down-slope\ Crater current \ Post-flow\ AC frequency\ AC balance\ Pulse frequency. LED display
show real-time dynamic output current, easily know the output state of welder.
Automatically Parameters storage: parameters saved even after the welder is turned off and on again.
New electrical structure and “Dust free” air passage can effectively prevent damage to power devices and
control circuits from dust drawn in by the fan, thus greatly improving the reliability of the machine. Support
remote control function, could match foot pedal/analog TIG torch.
Digital Welding Expert, Know You More
https://www.arccaptain.com
To Next Page
