Need help?Do you have a question about the Archer D1x and is the answer not in the manual?
General| Brand | Archer |
|---|---|
| Model | D1x |
| Category | Bicycle Accessories |
| Language | English |
Prepare the shifter by installing the batteries correctly, ensuring the positive end is first.
Route and prepare the shift cable and bowden housing for the shifter installation.
Prepare the bike by removing the rear wheel and disconnecting old components.
Mount the shifter onto the chainstay, routing the cable and securing it loosely.
Power on, pair the shifter with the app, and follow on-screen prompts for configuration.
Install the battery into the remote unit using the correct tool and orientation.
Mount the remote to compatible bike parts or using the provided clamp.
Check the shifter's battery level via LED indicators upon powering on or button press.
Standard operating mode with auto-shutdown and get-me-home gear enabled.
Limited LED activity and deactivated auto-shutdown/get-me-home features.
Adjust gear set points using remote buttons while shifter power button is held.
Shifter flashes red when not connected, waiting for app or remote pairing.
Shifter flashes orange when searching for a device to pair with.
To Next Page