Arctic Cat 425 - Seat Latch; Safety Flag Bracket; Rack Loading (Front and Rear); Trailering and Towing

44
4444
44
Mirrors
The mirrors can be adjusted to the desired
viewing angle or moved to a stowed posi-
tion when operating in trees or brush.
Seat Latch
AL676A
1. To remove the seat, lift up on the
latch release (located at the rear of
the seat); then raise the rear of the
seat and slide it rearward.
2. To lock the seat into position, slide
the front of the seat into the seat
retainers and push down firmly on
the rear of seat. The seat should
automatically lock into position.
Safety Flag Bracket
A bracket is provided for mounting a flag
at the rear of the ATV.
Rack Loading (Front and
Rear)
The front rack and rear rack are designed
to carry specified load capacities. Always
refer to the ATV Load Capacity Ratings
Chart for proper capacities.
Trailering and Towing
This ATV is equipped with a frame-
mounted receiver and a standard 50 mm
ball hitch.
ACE-018
When loading a trailer properly, two
items are critical: Gross Trailer Weight
(the weight of the trailer plus cargo) and
Trailer Tongue Weight.
Trailer Tongue Weight is the downward
force exerted on the hitch by the trailer
coupler when the trailer is fully loaded
and the coupler is at its normal towing
height. Refer to the Load Capacity Rat-
ings Chart for tongue weight informa-
tion.
! WARNING
Always adjust the mirrors to a posi-
tion that will not catch tree branches
or under-brush which could cause a
loss of control and severe injury or
death.
! WARNING
Make sure the seat is secure before
mounting the ATV. Serious injury
may result if the seat is not properly
secured.
! WARNING
Make sure the loads on the front and
rear racks will not interfere with the
ATV controls or obstruct the view of
the operator. Also, make sure the
loads are evenly distributed, prop-
erly secured, and will not shift while
operating the ATV.
! WARNING
Never use the racks as a towing or
trailering point.
! WARNING
Make sure that the load in the trailer
is properly secured and will not shift
while moving. Also, do not overload
the trailer.
! WARNING
Never exceed any of the ATV weight
restrictions.