47
4747
47
Division II - Operation/
Maintenance
Brakes
Brake pads must be burnished to achieve
full braking effectiveness. Braking dis-
tance will be extended until brake pads
are properly burnished. To properly bur-
nish the brakes, use following procedure:
CAUTION
TO PROPERLY BURNISH THE
BRAKES, USE FOLLOWING PROCE-
DURE:
• Choose an area sufficiently large
to safely accelerate ATV to 30
mph and to brake to a stop.
• Accelerate to 30 mph; then com-
press brake lever to decelerate to
0-5 mph.
• Repeat procedure five times.
! WARNING
Do not attempt sudden stops or put
yourself into a situation where a
sudden stop will be required until
the brake pads are properly bur-
nished.
To Next Page
Loading...
