Arctic Spas Y Series - Page 10

Arctic Essentials Owners Manual
9
 Series Techoo

For 240  (4 wires)
Correct wiring of the
electrical service box,
GFCI, and pack terminal
block is essential.
Call an electrician
if necessary.
For 120  ( wires)
*If connected to a
3 wire system, no 240 
component will work.
Electrical wiring: orth American model
 
 
 




n.ye.ce 20  or 20/400 
Correct wiring of the electrical service box, RCD,
and pack terminal block is essential!
Call an electrician if necessary.
Electrical wiring: in.ye European model
1-phase
Connect P1 between P
and P13. Connect P2
between P10 and P4.
2-phase
with single neutral
Connect P1 between P
and P10. Connect P2
between P13 and P4.
3-phase
with single neutral
Connect P1 between P
and P10. Connect P2
between P11 and P13.
3-phase Delta
Connect P1 between P
and P10. Connect P2
between P13 and P4.
3-phase Delta
Connect P1 between P
and P10. Connect P2
between P13 and P4.
n.yt.ce 20  or 20/400 
Correct wiring of the electrical service box, RCD,
and pack terminal block is essential!
Call an electrician if necessary.
Electrical wiring: in.yt European model
1-phase
Connect P1 between P
and P13. Connect P2
between P10 and P4.
2-phase
with single neutral
Connect P1 between P
and P10. Connect P2
between P13 and P4.
3-phase
with single neutral
Connect P1 between P
and P10. Connect P2
between P11 and P13.
Warning
In.ye.ce models must always be connected to a
circuit protected by a Residual-Current Device
(RCD) having a rated operating residual-current not
exceeding 30 mA.
Warning
In.yt.ce models must always be connected to a
circuit protected by a Residual-Current Device
(RCD) having a rated operating residual-current
not exceeding 30 mA.
P2
P2
P1
N
L1
G
N
P2
P1
L1
L2
G
L3
P2
P1
L1
L2
G
N
P2
P1
L1
L2
L3
G
N
L1
P1
P2
G
N
L1
L2
P1
P2
G
N
L3
L1
L2
P1
P2
G
L3
L1
L2
P1
P2
G
Refer to wiring diagram in the enclosure box lid for more information.
Refer to wiring diagram in the enclosure box lid for more information.
Refer to wiring diagram in the enclosure box lid for more information.
5V[L!;VJVU]LY[TVKLS[VH=Z`Z[LT[OL^OP[LJVTTVU
accessory wire must be moved. See wiring diagram for details.