Arctic Spas Y Series - Page 13

12

 Series Techoo
Pump 2 (A2)
oltage120 240 
Green / groundP51P51
Black / low speed-P-P
Red / high-speed3-P3-P
White / commonP0P1
lower (A4) (in.ye ce only)
oltage120 240 
Green / groundP48P48
Black / line-P-P
White / commonP5P8
Pump  (A4) (in.yt ce only)
oltage120 240 
Green / groundP48P48
Black / low speed-P-P
White / commonP5P8
Circ. pump (A1)
oltage120 240 
Green / groundP52P52
Black / line1-P1-P
White / commonP1P2
Light (12  AC, 1A Max.)
oltage
Always onP34
RelayP35
Pump 1 (A)
oltage120 240 
Green / groundP49P49
Black / low speed2-P2-P
White / commonP58P9
Oonator (A1)
oltage120 
240 
Green / groundP52
P52
Black / line1-P
1-P
White / commonP1
P2
Direct output 1 (in.ye ce only)
(Floating connector)
oltage120 240 
Green / groundP4P4
Black / lineP32P32
White / commonP5P
This table shows typical connections. OEMs may have a different connection scheme.
6aVUH[VYHUKJPYJW\TWJHUILJVTIPULKVU[OLZHTLV\[W\[]PH[OLVW[PVUHSZWSP[[LY77
High voltage accessory connections
Tw o options are available with  Series spa packs for connecting high voltage accessories: 0.250” quick-connect
terminals, or AMP pins and housings.
in.ye
These tabs require high-voltage accessories to have straight, non-insulated, female quick-connect terminals for all
connections, including ground. Depending on where the connections are made on the in.ye pack PCB, 120  and
240  accessories are supported. Refer to the following tables for correct connections. Note that all female
terminals
must be correctly and completely seated on the PCB tab for proper current ratings.