ARCURE BLAXTAIR 3 - Operational use; Precautions for use

BXT3-V2.3
ARCURE SA – 14, rue Scandicci – 93500 Pantin – France - Tel.: +33 144 068 190
www.arcure.net
09/05/2019 12/41
4 Operational use
4.1 Precautions for use
BLAXTAIR® processing unit(s) shall be handled with care:
• Do not install the processing unit(s) near heating equipment;
• Do not install the processing unit(s) near equipment generating
electromagnetic interference;
• Do not pull on harnesses;
• Do not cover or place anything over the processing unit(s);
• Make sure that a free air flow around the processing unit(s) is
maintained. If not, it could prevent proper heat dissipation and lead
to the processing unit shutting down.
• Keep the sensor head windows clean;
• Never open or tamper with a sensor head or processing unit as
warranty will be void.
• Do not alter sensor head(s) or processing unit(s) locations. Only
Blaxtair trained engineers are authorised to do so;
• Do not unplug any connector on the processing unit(s) or on the
sensor head(s) unless requested to do so by a Blaxtair support
engineer;
Do not connect or disconnect the monitor(s)
when the processing unit is running. This could
damage the system, rendering it inoperative and
voiding the warranty.