If a problem occurs during
operation. The visible alarm will be
‘purple’ for as long as the failure
exists (except in the case of a
detection when it turns ‘red’)
5.6 Recording (optional)
If the BLAXTAIR® system has been ordered ‘with a recorder’, the Processing
Unit will have a built in 120GB hard drive which will record the footage from all
alarm events.
This data can be used to analyse the BLAXTAIR®’s performance and can
prove invaluable in diagnosing any problems ‘remotely’ without the need for
an engineer visiting site.
The footage may also prove valuable if an incident has occurred, to ascertain
the cause, etc. of an incident.
Many customers analyse the footage to develop better working practices
The hard drive will record approximately 2hrs of accumulated footage which
equates to approximately one week of normal use. When the hard drive is full,
the oldest data is overwritten.
Data includes:
• Raw video
• Processed video
To Next Page
Loading...
