Arduino Portenta H7 Series User Manual

Arduino® Portenta H7 Lite Connected
7 / 20 Arduino® Portenta H7 Lite Connected Modified: 11/05/2022
Component Details
ECDH: FIPS SP800-56A Elliptic
Curve Diffie-Hellman
NIST standard P256 elliptic curve
support
Hardware support for symmetric
algorithms
SHA-256 & HMAC hash including
off-chip context save/restore
AES-128: encrypt/decrypt, galois
field multiply for GCM
Networking key management
support
Turnkey PRF/HKDF calculation for
TLS 1.2 & 1.3
Ephemeral key generation and key
agreement in SRAM – Small
message encryption with keys
entirely protected
Secure boot support
Full ECDSA code signature
validation, optional stored
digest/signature – optional
communication key disablement
prior to secure boot
Internal high-quality FIPS 800-90
A/B/C Random Number Generator
(RNG)
Two high-endurance monotonic
counters
Guaranteed unique 72-bit serial
number
SE050 Secure element Ready-to-use IoT secure element
solution
MKR compatible header 7x PWM channels
7x ADC channels
1x SPI
1x UART
1x I2C
ESLOV Connector
I2C port with automatic device
enumeration
NXP PF1550 Programmable
PMIC
Dynamic voltage scaling
Programmable independent
1A voltage output to carrier board

Arduino Portenta H7 Series Specifications

General

Processor	Dual-core Arm Cortex-M7 and Cortex-M4
Clock Speed	480 MHz (Cortex-M7), 240 MHz (Cortex-M4)
Flash Memory	2 MB
SRAM	1 MB
Operating Voltage	3.3V
Input Voltage (recommended)	5V
EEPROM	No
Operating Temperature	-40°C to +85°C
Dimensions	66.04 mm x 25.4 mm
RAM	8 MB SDRAM
Analog Output Pins	2
Connectivity	WiFi, Bluetooth, Ethernet
WiFi	802.11 b/g/n
Bluetooth	Bluetooth 5
USB	USB 2.0
Ethernet	10/100 Ethernet
Camera Interface	Parallel camera interface
CAN	Yes
SPI	Yes
I2C	Yes
UART	Yes