Ardwolf A10 - Set up date and time

09
Menu
Fingerprint
User Code
Add Code
Delete Code
Delete All
2↑,8↓, # Enter
Delete All?
*No Yes
Menu
User Code
System
2↑,8↓, # Enter
System
Date & Time
Verify Mode
2↑,8↓, # Enter
Date & time
Date: dd/mm/yyyy
Time: hh/mm/ss
* Exit, # Confirm
Menu
User Code
System
2↑,8↓, # Enter
Verify Mode
Finger/Code
Finger+Code
2↑, 8↓, # Enter
Menu
User Code
System
2↑,8↓, # Enter
System
Verify Mode
Beep
2↑,8↓, # Enter
Beep
On
Off
2↑, 8↓, # Enter
System
Date & Time
Verify Mode
2↑,8↓, # Enter
11. Delete All User Code
Login system, enter menu page (refter page 5 “5. Rule of operation”).
12. Set up date and time
Login system, enter menu page (refer page 5 “5. Rule of operation”).
Input number, the default number will be replaced.
13. Set up Verify Mode
Login system, enter menu page (refer page 5 “5. Rule of operation”).
There are three different verify mode, fingerprint or user code, fingerprint + code and fingerprint +
14. Set up Beep sound
Login system, enter menu page (refer page 5 “5. Rule of operation”).
You may turn on or off sound.
fingerprint, You may pick up one that you want.