EN
EN
• Connect Arenti APP
Scan QR code to download and install the Arenti APP. Also,
you can search "Arenti" on App Store (IOS) or Play Store
(Android).
Download and install Arenti APP. Open APP home page, Click
"+" at the right top page. Follow the guide on the APP to add
the camera step by step. After connection is successful, the
indicator is solid blue.
Troubleshooting
• Camera is not powering on:
1. Try to use another outlet.
2. Try to use another 5V power adapter/cable to power up.
• Failed to scan the QR code from Arenti APP:
1. Remove the film from the Camera Lens.
2. Keep distance 10-15 cm (4-6 inch) between the camera
and mobile phone.
3. Confirm the camera indicator is red flashing slowly.
• Failed to connect WiFi:
1. Confirm that scan QR code is successful: After scanning,
the camera has the prompt sound, and network indicator
turns to red fast flashing.
2. Make sure input correct WiFi password, the WiFi password
you set not contain special characters such as =\';.
3. Make sure the WiFi band meets the network requirement
of camera that camera supports 2.4GHz and 5GHz.
4. Change the encryption of the WiFi network to
WPA2-PSK/WPA-PSK(safer encryption) on your router.
5. Confirm camera is near the WiFi router.
If these doesn't work, please contact support@arenti.com.
To Next Page
Loading...
