Page 30
9.13 Model numbers
Section 10. COMMISSIONING
10.1 Commissioning preliminaries
The KITZ unit should be commissioned in conjunction with the K Range Protection
Access Software & Toolkit (running on a PC) and (at least) one K Range relay.
See R8514 Protection Access Software & Toolkit or publication R8515 Courier
Access Software which are provided with the software.
10.1.1 Module connection
Reference should be made to Section 3 of this manual and to the user manual of
the computer (PC) on which the Protection Access Software & Toolkit is to be run.
10.1.2 Electrostatic discharge (ESD)
See recommendations in Section 2 of this user manual before handling the
module.
10.1.3 Inspection
Carefully examine the unit and case to see that no damage has occurred since
installation.
10.1.4 Earthing
10.1.4.1 Mains earthing
The KITZ unit must be earthed.
KITZ 10 X X A E
Power supply
AC only 1
AC/DC 2
Mounting arrangement
Desk top X
Back of panel Y
Auxiliary supply
24/125V dc or 110/125V ac 2
48/250V dc or 110/240V ac 5
To Next Page
Loading...