Areva MiCOM P521 - Page 10

P521/EN AD/B21 Update Documentation
Page 8/24 MiCOM P521
Cold Load PU
tI>>>? No
Associates the I>>> time delay threshold with the cold
load pick up function. To associate tI>>> with the cold
load pick up function, press 5 and select (Yes). Select
(No) if the user does not wish to associate tI>>> with the
cold load pick up function. Validate your choice using 5.
Cold Load PU
tI>>>>? No
Associates the I>>>> time delay threshold with the cold
load pick up function. To associate tI>>>> with the cold
load pick up function, press 5 and select (Yes). Select
(No) if the user does not wish to associate tI>>>> with
the cold load pick up function. Validate your choice using
5.
Cold Load PU
tIe>? No
Associates the Ie> time delay threshold with the cold load
pick up function. To associate tIe> with the cold load pick
up function, press 5 and select (Yes). Select (No) if the
user does not wish to associate tIe> with the cold load
pick up function. Validate your choice using 5.
Cold Load PU
tIe>>? No
Associates the Ie>> time delay threshold with the cold
load pick up function. To associate tIe>> with the cold
load pick up function, press 5 and select (Yes). Select
(No) if the user does not wish to associate tIe>> with the
cold load pick up function. Validate your choice using 5.
Cold Load PU
tIe>>>? No
Associates the Ie>>> time delay threshold with the cold
load pick up function. To associate tIe>>> with the cold
load pick up function, press 5 and select (Yes). Select
(No) if the user does not wish to associate tIe>>> with the
cold load pick up function. Validate your choice using 5.
Cold Load PU
tIe>>>>? No
Associates the Ie>>>> time delay threshold with the cold
load pick up function. To associate tIe>>>> with the
cold load pick up function, press 5 and select (Yes).
Select (No) if the user does not wish to associate tIe>>>>
with the cold load pick up function. Validate your choice
using 5.
Cold Load PU
tI2>? No
Associates the I2> time delay threshold with the cold load
pick up function. To associate tI2> with the cold load pick
up function, press 5 and select (Yes). Select (No) if the
user does not wish to associate tI2> with the cold load
pick up function. Validate your choice using 5.
Cold Load PU
tI2>>? No
Associates the I2>> time delay threshold with the cold
load pick up function. To associate tI2>> with the cold
load pick up function, press 5 and select (Yes). Select
(No) if the user does not wish to associate tI2>> with the
cold load pick up function. Validate your choice using 5.