Areva MiCOM P921 - Page 138

P92x/EN FT/E11 Technical Guide
User Guide
Page 60/110 MiCOM P921-P922-P923
LATCH EQUATION B =
NO
Description : selection of the result of the “B” logic equation,
which will be latched.
Range : YES/NO
11.2.3 Additional information for the MiCOM P922 and P923 relay
LATCH tV2>=
NO
Description : selection of the time-delayed information “tV2>”,
which will be latched.
Range : YES/NO
LATCH tV2>>=
NO
Description : selection of the time-delayed information
“tV2>>”, which will be latched.
Range : YES/NO
LATCH tV1<=
NO
Description : selection of the time-delayed information “tV1<”,
which will be latched.
Range : YES/NO
LATCH tV1<<=
NO
Description : selection of the time-delayed information
“tV1<<”, which will be latched.
Range : YES/NO
LATCH tF1 =
NO
Description : selection of the time-delayed information “tF1”,
which will be latched.
Range : YES/NO
LATCH tF2 =
NO
Description : selection of the time-delayed information “tF2”,
which will be latched.
Range : YES/NO
LATCH tF3 =
NO
Description : selection of the time-delayed information “tF3”,
which will be latched.
Range : YES/NO
LATCH tF4 =
NO
Description : selection of the time-delayed information “tF4”,
which will be latched.
Range : YES/NO
LATCH tF5 =
NO
Description : selection of the time-delayed information “tF5”,
which will be latched.
Range : YES/NO
LATCH tF6 =
NO
Description : selection of the time-delayed information “tF6”,
which will be latched.
Range : YES/NO