This air conditioner is equipped with cooling, heating, drying and fan functions.
Details on these functions are provided below; refer on these descriptions when using the air conditioner.
NAME OF PARTS AND OPERATION SELECTOR 3
INSTALLATION LOCATION 3
ELECTRICAL REQUIREMENTS 3
SAFETY INSTRUCTIONS 4
USING THE REMOTE CONTROL UNIT 4
REMOTE CONTROL UNIT 5
HOW TO SET THE PRESENT TIME 6
COOLING - HEATING 6
AUTOMATIC OPERATION 6
DEHUMIDIFYING (DRY) 7
FAN ONLY 7
ADJUSTING THE FAN SPEED 7
SLEEP MODE 7
SETTING THE TIMER 8
ADJUSTING THE AIR FLOW DIRECTION 8
OPERATION WITHOUT THE REMOTE CONTROL UNIT 9
CARE AND CLEANING 9
TIPS FOR ENERGY SAVING 10
TROUBLESHOOTING 10
CONTENTS
DECLARATION OF CONFORMITY
This product is marked as it satisfies Directives:
– Low voltage no. 73/23 EEC and 93/68 EEC.
– Electromagnetic Compatibility no. 89/336 EEC, 92/31 EEC and 93/68 EEC.
This declaration will become void in case of misusage and/or from non observance though partial of Manufacturer's installation
and/or operating instructions.
EG
NOTE
PRODUCT INFORMATION
If you have problems or questions concerning your Air Conditioner, you
will need the following information. Model and serial numbers are on the
nameplate on the bottom of the air conditioner.
Model No.
...........................................................................................................................................................
Serial No.............................................................................................................................................................
Date of purchase
..........................................................................................................................................
Dealer’s address
..........................................................................................................................................
Phone numer
......................................................................................
ALERT SYMBOLS
The following symbols used in this manual, alert you to potentially
dangerous conditions to users, service personnel or the appliance:
This symbol refers to a hazard or unsafe practice which can result in
severe personal injury or death.
This symbol refers to a hazard or unsafe practice which can result in
personal injury or product or property damage.
WARNING
CAUTION
To Next Page
Loading...
