EasyManuals Logo

Argo IRO User Manual

Argo IRO
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
V 01/19
28
The temperature cannot be adjusted.
HOW TO ELIMINATE CONDENSATE
This appliance automatically vaporises condensate in the cooling mode.
When the air conditioner operates in cooling mode, there is no need to drain condensate continuously; only in certain
weather conditions with very humid air may it occur that water deposits inside the unit. When its inner tank is full, the
air conditioner beeps 8 times and the message "FL" appears on the display to signal that the tank is full and stop
the appliance's operation.
Cooling
When the unit operates in the cooling mode, ensure that the rubber cap
closing the drainage opening on the back of the appliance is properly
positioned.
To empty the container, switch the air conditioner off and unplug the
cord. Remove the cap from the rear drainage opening and place its end
over a normal drain. Ensure that the tube is not twisted or bent. The tube
must slope downwards. Re-close the drainage opening with the cap,
insert it into the clamp and resume use of the air conditioner.
Dehumidification
WARNING!
When using the air conditioner in dehumidification mode, we recommend always ensuring continuous drainage, in order
to maximise dehumidification efficiency.
Use the drainage outlet on the appliance. The water can be drained into a drain by simply connecting the supplied
drainage tube.
1. Remove the cap by turning it anti-clockwise then
remove the plug.
2.Next, insert the drainage tube into the connection tube.
3. Avoid bends in the drainage tube.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Argo IRO and is the answer not in the manual?

Argo IRO Specifications

General IconGeneral
TypeMonobloc mobile air conditioner
Cord length1.5 m
Noise level65 dB
Hose diameter150 mm
Number of speeds3
Remotely operatedYes
Airflow (high speed)24 m³/h
Cooling capacity (max)10000 BTU/h
Air conditioner functionsCooling
Cooling capacity in watts (nominal)2720 W
Heating capacity in watts (nominal)- W
Cooling energy efficiency (EER, W/W)2.6
Display typeLED
Product colorWhite
AC input voltage230 V
AC input frequency50 Hz
Energy efficiency scaleA+++ to D
Energy efficiency class (cooling)A
Energy efficiency class (heating)No
Hourly energy consumption (cooling)1.1 kWh
Hourly energy consumption (heating)- kWh
Weight and Dimensions IconWeight and Dimensions
Depth382 mm
Width470 mm
Height770 mm
Weight28000 g

Related product manuals