Argo IRO User Manual

V 01/19
33
Keep the appliance in a vertical position at all times. Do not place any heavy objects on the
top and, if possible, protect the air conditioner with a plastic sheet.
4. Transport.
Preferably keep the air conditioner in the vertical position when
transporting it.
Should this not be possible, rest it on its right-hand side; when it
reaches its destination, immediately put the appliance in the
vertical position and wait at least 4 hours before using it in the
cooling mode.
5. For complete safety, regularly check the condition of the power cord; should it be damaged through use,
contact the Service Centre to replace it.
TIPS FOR MAXIMISING COMFORT AND MINIMISING CONSUMPTION
CHECK that:
• the unit's extraction and delivery grilles are always unobstructed;
• the air filters are always clean: a dirty filter will decrease the passage of air and thus reduce the unit
performance;
• the doors and windows are closed, to avoid infiltration of unconditioned air;
• the flexible hose is correctly positioned, without folds or sharp bends;
• the room temperature is above 18 ºC for the cooling mode, and above 10 ºC for dehumidification mode.

Argo IRO Specifications

General

Type	Monobloc mobile air conditioner
Cord length	1.5 m
Noise level	65 dB
Hose diameter	150 mm
Number of speeds	3
Remotely operated	Yes
Airflow (high speed)	24 m³/h
Cooling capacity (max)	10000 BTU/h
Air conditioner functions	Cooling
Cooling capacity in watts (nominal)	2720 W
Heating capacity in watts (nominal)	- W
Cooling energy efficiency (EER, W/W)	2.6
Display type	LED
Product color	White
AC input voltage	230 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Energy efficiency class (cooling)	A
Energy efficiency class (heating)	No
Hourly energy consumption (cooling)	1.1 kWh
Hourly energy consumption (heating)	- kWh

Weight and Dimensions

Depth	382 mm
Width	470 mm
Height	770 mm
Weight	28000 g