To Next PageTo Next PageWhat to do if my Argo Dehumidifier is not working and I can't adjust the settings?
Your Argo Dehumidifier might not be working, or you may be unable to adjust the settings, if the temperature is above 32°C or below 5°C. This can also occur if the internal tank is full or not positioned correctly, or if the set humidity level is higher than the humidity in the room. Try emptying the tank and positioning it correctly.
Why does my Argo LILIUM 11 stop working during the dehumidifying process?
Your Argo Dehumidifier might stop working during dehumidifying if the room temperature is too high or too low, falling outside of the unit's operational range. The dehumidifier may start automatically when the room temperature returns to the working scope.
Why is my Argo Dehumidifier not dehumidifying effectively?
If your Argo Dehumidifier's dehumidification effect is reduced, it could be due to several factors: the room temperature being too low, an inadequate humidity level setting, a dust-filled filter, or open doors and windows. If the unit is running with a temperature between 5 and 15 °C, the unit will pause for automatic defrosting. The compressor will pause for short periods. After the defrost, the unit will resume normal operation. Try reducing the humidity level, cleaning the filter, and closing any doors and windows. The dehumidifier may start automatically when the room temperature returns to the working scope.
What to do if there is water in the tank of my Argo Dehumidifier even when using a hose for continuous drainage?
If you find water in the tank of your Argo Dehumidifier despite using a hose for continuous condensation drainage, check the drainage connections. Ensure the drainage hose is connected correctly. You can also try removing and replacing the drainage hose.
How to troubleshoot if the ON/OFF LED doesn't turn on when the power is connected to my Argo LILIUM 11 Dehumidifier?
If the ON/OFF LED on your Argo Dehumidifier doesn't illuminate when connected to power, check the electrical power supply. Make sure the electric circuit and plug are not damaged, and ensure the cable isn't damaged either.
Why does clothing take so long to dry with my Argo LILIUM 11 Dehumidifier?
If clothing isn't drying quickly with your Argo Dehumidifier, it could be because the room temperature is very low. Wet clothing may dry more slowly in low temperature.
General| Brand | Argo |
|---|---|
| Model | LILIUM 11 |
| Category | Dehumidifier |
| Language | English |
Steps to set up and start the dehumidifier.
Important considerations and warnings during operation.
Procedure for safely switching off the unit.
Instructions for emptying the water tank.
Explanation of the display and control buttons.
Details on LEDs, operation modes, and auto restart.
Guidelines for cleaning the humidifier's outer casing.
Procedure for cleaning the water collection tank.
Instructions for cleaning the air intake filter.
