EasyManuals Logo

Argo MADISON User Manual

Argo MADISON
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
V 01/22
24
Make sure the power outlet is intact, and after plugging the power
cord into the outlet, check that the cord is placed where it cannot be
walked on to prevent it from being accidentally pulled out of the
outlet.
PRECAUTION!
Do not insert any objects into the air conditioner: this is very
dangerous as the fan turns at high speed.
Ensure that air circulates freely around the unit. Do not cover
the air intake and delivery grilles with drapes or any other
means.
WARNING!
The air conditioner must be positioned at least 50 cm from the wall
or any other obstacles, on a flat and stable surface so as to avoid
water leaks.
The air conditioner is fitted with a system for protecting the
compressor from overload. This means that the compressor
only starts 3 minutes after its previous stoppage.
Please wait at least 3 minutes before starting the unit. This helps
prevent the compressor from being damaged.
WARNING!
In the event of an anomaly, switch the appliance off and unplug
it from the socket. Do not dismantle or attempt to repair or modify
the product. In the event of a malfunction, contact the service
centre directly.
WARNING!
Do not expose the air conditioner to direct sunlight, as the
colour of the materials may change; moreover, the appliance
may overheat causing the protection mechanism to intervene
and switch the appliance off.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Argo MADISON and is the answer not in the manual?

Argo MADISON Specifications

General IconGeneral
BrandArgo
ModelMADISON
CategoryAir Conditioner
LanguageEnglish

Related product manuals