V 10/19
56
10. TIMER ON / TIMER OFF button
SETTING TIMER ON
This function allows you to program the air conditioner to turn on. When you press this button, the
icon will disappear from the display and the word "ON" will flash on the remote control display.
Press "▲" or "▼" to adjust the TIMER ON setting.
Press and hold "▲" or "▼" for 2 seconds to rapidly change the time until you reach the desired
value. Press TIMER ON to confirm. The word "ON" will stop flashing. The icon will re-appear on
the display.
CANCELLING TIMER ON
If the TIMER ON function is enabled, press the TIMER ON button to cancel the setting.
SETTING TIMER OFF
This function allows you to program the air conditioner to turn off. When you press this button, the
icon will disappear from the display and the word "OFF" will flash on the remote control display.
Press "▲" or "▼" to adjust the TIMER OFF setting. Press and hold "▲" or "▼" for 2 seconds to
rapidly change the time until you reach the desired value. Press "TIMER OFF". The word "OFF"
will stop flashing. The icon will re-appear on the display.
CANCELLING TIMER OFF
If the TIMER OFF function is enabled, press the TIMER OFF button to cancel the setting.
N.B.:
• You can set the TIMER ON and TIMER OFF function in OFF and ON mode.
• Before you set the TIMER ON or TIMER OFF function, set the clock.
• When the TIMER ON or TIMER OFF function is enabled, the air conditioner will turn on or off
according to the set time. Turning the air conditioner ON/OFF will not affect the setting.
11. CLOCK button
Press this button to set the clock. The icon will flash on the remote control display. Press "▲" or
"▼" within 5 seconds to set the clock. Each time you press "▲" or "▼", the clock will increase or
decrease by 1 minute. Press and hold "▲" or "▼" for 2 seconds to rapidly change the time. Release
the button when you reach the desired time. Press "CLOCK" to confirm the time. The icon will
stop flashing.
N.B.:
• The time displays in the 24-hour clock format.
• If no adjustment is made for 5 seconds the remote control will exit the setting mode. This also
applies to the TIMER ON/OFF function.
14. QUIET button
1. When the Quiet function is selected, the symbol will appear on the display .
2. In cooling mode the internal fan works with 4 steps of speed; 10 minutes later or when the indoor
temperature is ≤28°C, the internal fan will operate at step 2 or in quiet mode, ie in accordance with
a comparison between the internal temperature of the environment and the set temperature.
3. In heating mode the internal fan operates with step 3 of speed or in quiet mode, ie in accordance
with a comparison between the internal temperature of the room and the set temperature.
4. In the dehumidification and ventilation mode the internal fan operates in quiet mode.
5. In auto mode the internal fan operates in auto quiet mode according to the current modes:
cooling, heating and ventilation.
12. LIGHT button
Press this button to start the Wi-Fi function. When the Wi-Fi function is active, the "Wi-Fi" icon will
appear on the remote control display. When the remote control is off, press and hold the "Mode"
button and the "Wi-Fi" button simultaneously for 1 sec to return to the factory settings.
To Next Page