To Next PageTo Next PageWhat to do if Argo Air Conditioner is not cooling properly?
If your Argo Air Conditioner is not achieving the desired heating or cooling, check if the voltage is too low and wait for it to return to normal. Clean the filter if it's dirty. Ensure the set temperature is within the available range. Close any open doors or windows.
Why is my Argo Air Conditioner not cooling/heating to the desired level?
If your Argo Air Conditioner isn't heating or cooling as expected, first wait for the voltage to return to normal. Then, clean the filter. Ensure the temperature is within the adjustable range and close all doors and windows.
Why is my Argo Air Conditioner not working?
If your Argo Air Conditioner isn't working, try these steps: wait for the power to be restored, reinsert the plug, wait 3 minutes before restarting the unit, or reset the function. If these steps don't work, have the circuit breaker or fuse replaced by a qualified technician, or have the unit itself replaced by a qualified technician.
What to do if my Argo X3I ECO PLUS is not working?
If your Argo Air Conditioner isn't working, try these steps: First, ensure the unit is properly plugged in. If it is, check the circuit breaker or fuse and have it replaced by a qualified technician if necessary. If there was a power outage, wait for the power to be restored. You can also try waiting 3 minutes before restarting the unit or resetting the function.
Why does my Argo Air Conditioner turn on by itself?
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Cooling Power | 800 W |
| Energy Efficiency Class Cooling | A++ |
| Refrigerant | R32 |
| Power Supply | 220-240V/50Hz |
