To Next PageTo Next Page
Need help?Do you have a question about the Argox AS-8120 and is the answer not in the manual?
General| Interface | USB, RS-232, Keyboard Wedge |
|---|---|
| Scanning Speed | 100 scans/sec |
| Humidity | 5% to 95% (non-condensing) |
| Drop Specification | 1.5 m |
| Voltage | 5 VDC ± 5% |
| Type | Laser |
| Light Source | Laser Diode |
| Resolution | 0.1 mm |
| Print Contrast | 25% minimum |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Barcode Types | UPC/EAN, Code 39, Code 128, ITF, Codabar |
Steps for configuring and operating the ArgoxScan scanner, including interface and code options.
Procedure for connecting the scanner using a Keyboard Wedge interface.
Steps for connecting the scanner via the RS-232 serial port.
Instructions for connecting the scanner using a USB interface.
Steps to program scanner options by scanning barcodes, including setting parameters and confirming.
Configuration options for RS-232 flow control, including None, RTS/CTS, Xon/Xoff, and ACK/NAK.
Selection of baud rates for RS-232 communication, from 300 to 38400 BPS.
Details of pin assignments for the 8-pin RJ-45 connector for RS-232 and Keyboard interfaces.
Pinout details for the 10-pin RJ-45 connector used with RS-232 and Keyboard interfaces.
Pinout details for the Keyboard Wedge combo connector (Mini-DIN 6P Male and DIN 5P Female).
Pinout and definitions for the RS-232 DB-9F connector used for host communication.
Pin configuration for the Keyboard Wedge PS/2 connector (Mini-DIN 6P Male and Female).
Options to enable various barcode symbologies such as Code 39, Code 128, EAN, and UPC.
Instructions for resetting the scanner to its original factory default settings.
