Need help?Do you have a question about the Argox AS-9500 and is the answer not in the manual?
Steps for programming the scanner using barcodes and the available options.
Guide to selecting and changing the scanner's communication interface.
Guide to programming the imager for optical character recognition.
Creating custom templates for defining OCR string length and content.
Restoring the imager to its factory default programming settings.
General| Interface | USB, RS-232, Keyboard Wedge |
|---|---|
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Resolution | 4 mil |
| Operating Voltage | 5 VDC ± 5% |
| Weight | 150 g |
| Type | Handheld |
| Scanning Method | Imager |
| Light Source | LED |
| Print Contrast | 25% |
| Humidity | 5% to 95% (non-condensing) |
| Supported Barcodes | UPC/EAN, Code 39, Code 128 |
| Drop Specification | 1.5 m |
| Storage Temperature | -20°C to 60°C |
To Next Page
