Need help?Do you have a question about the Argox P4 Series and is the answer not in the manual?
General| Brand | Argox |
|---|---|
| Model | P4 Series |
| Category | Barcode Reader |
| Language | English |
Statements on FCC ID, warnings, and RF module compliance.
Statement on Bluetooth/Wireless LAN compliance with radio regulations.
Warning against disassembling or modifying the product.
Warning about potential interference from microwaves or static electricity.
ARGOX Corporation's disclaimer for errors and damages.
Caution that unauthorized modifications void user authority.
Overview of key features like connectivity, speed, and memory.
Lists all items included in the printer package.
Instructions for inspecting and reporting shipping damage.
Identifies external components like LEDs and the Feed Button.
Details the rear panel connections and ports (RS232, LAN, USB).
Shows internal components related to ribbon and media handling.
Identifies the printhead, media guides, and sensors.
Explains LED blinking patterns and their meanings.
Details LED combinations for errors and specific conditions.
Explains how to enter system mode and lists available commands via LED combinations.
Step-by-step guide to connecting the power supply and cord.
Procedure for powering on the printer and initial LED behavior.
Procedure for safely powering off the printer.
Instructions on how to prepare media rolls for loading.
Step-by-step guide to physically loading a media roll into the printer.
How to feed a label and test the media path.
Description and visual representation of non-continuous media.
Description and visual representation of fanfold media.
Explains the purpose and installation of the paper support roller.
Step-by-step guide for installing a ribbon roll.
Details the transmissive sensor and its function in detecting gaps.
Explains the reflective sensor's function for notches and black marks.
Steps to calibrate the media sensors for optimal printing.
How to run a self-test to print a configuration label.
Explains Version Information, Standard RAM, and Available RAM.
Describes Flash Type, Available Flash, and soft font counts.
Details H. Position Adjust and Sensor Type parameters.
Covers Print Method, Print Length, MAC Address, and network settings.
Explains DHCP, IP/IPv6 addresses, and socket communication.
Details TPH/Cutter offsets, sensor calibrations, and test patterns.
Procedure to reset the printer to its factory default state.
Requirements and usage for USB and RS-232 serial interfaces.
Explains LED indicators for Ethernet connectivity status.
General information on installing printer drivers for Windows.
Step-by-step guide for installing drivers using the Seagull Driver Wizard via USB.
Guide for installing drivers for non-USB connections (Parallel, Serial, Ethernet).
Routine maintenance for print quality and printer longevity.
How to clean dust, dirt, and debris from media path components.
Instructions for cleaning sensors to ensure accurate media detection.
Guide to cleaning the platen roller for optimal print quality.
Solutions for common issues like the printer not powering on or feeding media.
Addresses issues like media out, paper jams, and incorrect printing position.
Solutions for ribbon out, broken ribbon, or wrinkled ribbon problems.
Covers issues like broken lines, USB errors, cutter problems, and printhead errors.
Detailed specifications for P4-250, P4-350, and P4-650 models.
Information on media sizes, types, ribbon sizes, and types.
Details supported fonts, barcodes, and graphics formats for PPLA.
Details supported fonts, barcodes, and graphics formats for PPLB and PPLZ.
Details Bluetooth version, operating parameters, and transmission properties.
Details Ethernet port, speed, protocol, and technology.
Details wireless LAN standards, frequencies, and data transmission.
Covers software settings, security protocols, and parameter monitoring for wireless LAN.
Details power supply, consumption, temperature, and humidity ranges.
Provides the size and weight of the printer.
Explains the pinouts for USB Type A and Type B connectors.
Details the pinout configuration for the Ethernet RJ-45 connector.
Describes the pinout for the DB9 female RS-232C serial port.
To Next Page
