Argus Mi-TIC - 6 Configuration Software; Running the Configuration Tool

 e2v technologies (uk) limited 2013 CR 114528 05 Apr 2013 DAS775571AA Version 1, page 23
6. CONFIGURATION SOFTWARE
The Argus
®
Mi-TIC Configuration Tool is supplied on the camera’s embedded
storage.
The Configuration Tool runs on a PC with Windows XP / Vista / Win7. This allows
the user to perform the following tasks:
• Set the temperature units to either °C or °F.
• Set the time and date format and synchronise the time and date with the PC
• Enable “black box” video recording *
• Customise the operation of the camera’s function buttons.
6.1 Running the Configuration Tool
To run the software, connect the Argus
®
Mi-TIC to your computer using the
Argus
®
Mi-TIC Charger Station and the supplied USB cable. The camera is
recognised as a removable disk.
Navigate to the removable disk and open it.
Note: If the camera is not recognised as a removable disk, check that the
camera is connected to the PC and correctly docked in the charger station and
switch the camera off and back on again.
Run ‘Mi-TicConfig.exe’