Argus Mi-TIC - Black Box Video Recording; Camera Function Button Set-Up

 e2v technologies (uk) limited 2013 CR 114528 05 Apr 2013 DAS775571AA Version 1, page 25
6.5 “Black Box” Video Recording*
Check the “Black Box Video Recording” box, then click the ‘Save Changes’
button. Eject the camera from the charger dock. Do not switch the camera off
and back on again. The new settings will be enabled.
Note: When “Black box” video recording is enabled, image capture, video
record and image playback functions are disabled.
6.6 Camera Function Button Set-up
The following camera functions can be assigned to either of the two function
buttons. Functions can be activated by either a short press (less than one
second), or a long press (three seconds).
• Zoom
• Application Mode (Fire or Search/Overhaul)
• Image Capture*
• Video Record*
• Image Freeze*
• Image Replay*
To assign functions to buttons, select the desired combinations and then click
the ‘Save Changes’ button. Eject the camera from the charger dock. Do not
switch the camera off and back on again. The new settings will be enabled.
* These functions are not available as standard. The additional image and
video options can be obtained by upgrading your camera with the 'image &
video upgrade' token (ARG_MI_IV).