Argus Mi-TIC - Setting the Temperature Units; Setting the Time and Date Format; Synchronising the Time and Date with the PC

 e2v technologies (uk) limited 2013 CR 114528 05 Apr 2013 DAS775571AA Version 1, page 24
6.2 Setting the Temperature Units
Select either C or F, then click the ‘Save Changes’ button circled in red below.
Eject the camera from the charger dock. Do not switch the camera off and
back on again. The new settings will be enabled.
6.3 Setting the Time and Date Format
Select either GB or US, then click the ‘Save Changes’ button. Eject the
camera from the charger dock. Do not switch the camera off and back on
again. The new settings will be enabled.
6.4 Synchronising the Time and Date with the PC
Check the “Synchronise time and date” box, then click the ‘Save Changes’
button. Eject the camera from the charger dock. Do not switch the camera off
and back on again. The new settings will be enabled.