1. TreeQinetic Software Installation
1.1. General hints
The TreeQinetic Measuring program is used to control the TreeQinetic system and to store the
data during pulling tests.
1.2. Installation of the TreeQinetic program
Login as administrator in order to install the program!
Make sure that all windows updates are loaded! Refer to Microsoft.com.
Run “setupe.exe“ in Administrator Modus.
CD:\\ TreeQinetic (xx) \setup.exe
The setup program installs
1. Microsoft .NET Framework
2. TreeQinetic
program
It might be necessary to restart the computer after installing the framework. If the installation does
not automatically continues after re-boot, please run the setup.exe again.
To Next Page
Loading...