2. TreeQinetic
Components
2.1. Contents of the measuring case
1 Communication Unit (1 piece)
2 Elastometer (1-4 pieces) with 10 Nails each
3 Inclinometer (1-4 pieces)
4 Forcemeter (1 piece)
5 Nail calibre
6 Impact cap for Inclinometer-fastener
7 Inclinometer-fastener (1-4 pieces, located in the lid of the case )
8 Charging unit
9 USB Cable
10 Charge cable 50cm (3 pieces)
11 Manual (located in the rear of the case)
12 (Long communication cable – on request)