We also recommend that you adopt appropriate measures for environmental protection: recycling of the
internal and external packaging of the product, including batteries (if any).
With your help it is possible to protect our planet and improve the quality of life, by preventing potentially
hazardous substances being released in to our environment.
2. Safety
Ariazone 5001 unit is extremely simple and reliable in selecting and performing all it’s functions.
Therefore, the user is not exposed to any risk, if the general safety guidelines reported below are
followed, in association with proper use and maintenance of the unit.
- Read this user manual carefully before operating the unit. If you do not understand any
section of this manual, please contact Ariazone International direct or your nearest Ariazone
distributor.
- This equipment is to be operated by accredited technician only! Users must have basic
knowledge of air-conditioning and refrigeration systems, including potential hazards
associated with the handling of refrigerants and systems under high pressure.
- Handle refrigerant with care as serious injury may occur. Always wear appropriate
protective clothing and safety glasses.
- Avoid inhalation of the refrigerant. Use only in well ventilated work areas.
- Use only R134a refrigerant with this equipment.
- Do not expose the machine to direct artificial heat or rain.
- Do not tamper with or change safety control devices or their settings.
- The power cable may only be connected to a socket with nominal voltage stated on
the rating plate, located at the rear of the unit.
- Power lead plug to be connected only to power point with an earth.
- When transporting the unit keep upright and remove refrigerant cylinder from platform.
- Never operate the equipment with a damaged power lead, replace it immediately.
- Before removing any protective cover from unit, always unplug power lead from power point.
- Maintenance is to be carried out as per the manufacturer recommendation shown in this
manual. Only Ariazone approved parts are to be used for maintenance and repairs.