4. Display descriptions
HIgH PrES - Excess pressure in refrigerant cylinder
TArE - Calibrating the weight display to read -0.00 with an empty cylinder on platform.
TAr1 - Calibrating 0.00 on recovered oil vessel
TAr2 - Calibrating 0.00 on new oil vessel
SPAn - Calibrating of the refrigerant electronic scale
SPn1 - Calibrating of the recovered oil vessel electronic scale
SPn2 - Calibrating of the new oil vessel electronic scale
Err1 - Disconnected load cell lead or faulty load-cell.
CYL FULL - Refrigerant weight exceeds maximum allowable limit and will not recover any more
refrigerant
nO rEF - No refrigerant pressure in service hoses, or manifold hand valves are not open
dOnE - The selected function is completed
FILT 99Hr - Displays filter life in number of hours when machine is switched on
PAUS - Recovery pause is running, for duration of three minutes.
bUSY - Purge solenoid opens to cylinder vapour port to pressurize oil separator
CYL - This display allows the operator to set the maximum allowable refrigerant weight in
cylinder.
OIL FULL - Operator should empty the oil vessel and press "STOP
ADD OIL - Operator should fill the new oil vessel.
To Next Page
Loading...
