What to do if my Ariens Sno-Thro Platinum SHO 24 Snow Blower runs briefly and then stops?
If your Ariens Snow Blower runs briefly and then stops, it may be due to a build-up of fumes in the fuel tank creating too much pressure. Try slowly loosening the fuel tank cap.
Why does my Ariens Sno-Thro Platinum SHO 24 leave too much snow behind?
If your Ariens Snow Blower is leaving excessive snow behind, the scraper blade may be worn or damaged. Adjust the scraper blade if it's worn, and replace it if it's damaged or has been adjusted down as far as possible but still doesn't touch the ground or clear correctly.
General| Clearing Width | 24 inches |
|---|---|
| Intake Height | 21 inches |
| Throwing Distance | Up to 50 feet |
| Speed Settings | 6 forward / 2 reverse |
| Starting System | Electric start |
| Impeller Diameter | 12 inches |
| Housing Material | Steel |
| Auger Material | Steel |
| Chute Rotation | 200 degrees |
| Engine | 254cc Ariens AX engine |
To Next Page
