41
settings - adjustment - problem identi cation menus
menu
sub-menu
parameter
Description range
factory
setting
8 3 BOILER TEMPERTURE
830Set temperature Central Heating(°C)
831Flow Heating temperature (°C)
832Return Heating temperature (°C)
833Domestic Hot Water Temperature (°) (COMBI)
8 4 SOLAR & STORAGE
840Storage Temperature (°)
841Solar collector Temperature
Displayed only with Solar Kit or
external storage Kit
842D.H.W. Inlet Temperature
843NTC Storage Low
844Storage Set-point stratifi cation
845Solar pump run time
846Collector overheat Temp Time
8 5 SERVICE
854P.C.B Hardware version
855P.C.B Software version
856P.C.B BUS Software version
8 6 STATISTICS
860Hours Burner On (Central Heating) (h/10)
861Hours Burner On (Domestic Hot Water) (h/10)
862Number of Flame Faults (nr/10)
863Number of ignition Cycles (nr/10)
864NOT PRESENT
865Heat request Duration
8 7 NOT ACTIVE
8 8 ERROR HISTORY
880Last 10 errors from E00 to E99
This parameter makes it possible to see the last 10 errors shown by the boiler as well as the relevant day, month and year.
Access the parameter to bring up the sequence of errors from number E00 to number E99.
The following data is shown in a sequence for each single error:
E -0 - error number
1 08 - error code
881Reset Error List Reset? Ok=Yes Esc=No
To Next Page
Loading...
