28
punerea în funcțiune commissioning
Tabel setări gaz
FAST EVO ONT C 11 EU FAST EVO ONT C 14 EU
G20 G230 G30 G31 G20 G230 G30 G31
Indicator Wobbe inferior
Lower Wobbe index
(15°C, 1013 mbar)
MJ/m
3
45,67 38,9 80,58 70,69 45,67 38,9 80,58 70,69
Presiune intrare gaz
Gas inlet pressure
mbar
20 20 28/30 37 20 20 28/30 37
Presiune maximă arzător gaz
Gas Burner Pressure max
mbar
15,0 10,35 24,3 32,3 14,0 9,8 26,4 34,7
Presiune minimă arzător gaz
Gas Burner Pressure min
mbar
3,0 2,16 4,5 6,7 2,2 1,6 3,5 5,0
Presiune aprindere lentă
Slow ignition pressure
mbar
4,0 3,4 5,5 8,3 2,71 2,0 4,1 6,0
Parametru PA - setare model şi tip de gaz
PA Parameter - Setting model and type of gas
PA
01 04 02 03 08 11 09 10
Jeturi arzător principal
Main Burner jets
nr.
11 13
Ø jeturi arzător
Ø burner jets
mm
1,15 1,3 0,75 0,75 1,2 1,35 0,8 0,8
Consum
Consumption
(15°C, 1013 mbar) (G.N.= m
3
/h) (LPG kg/h))
max
max
2,28 1,76 1,70 1,67 2,86 2,22 2,13 2,10
FAST EVO ONT C 16 EU
G20 G230 G30 G31
Indicator Wobbe inferior
Lower Wobbe index
(15°C, 1013 mbar)
MJ/m
3
45,67 38,9 80,58 70,69
Presiune intrare gaz
Gas inlet pressure
mbar
20 20 28/30 37
Presiune maximă arzător gaz
Gas Burner Pressure max
mbar
11,1 10,6 21,21 28,5
Presiune minimă arzător gaz
Gas Burner Pressure min
mbar
1,4 1,4 2,42 3,0
Presiune aprindere lentă
Slow ignition pressure
mbar
1,9 1,7 2,7 3,6
Parametru PA - setare model şi tip de gaz
PA Parameter - Setting model and type of gas
PA
15 18 16 17
Jeturi arzător principal
Main Burner jets
nr.
14
Ø jeturi arzător
Ø burner jets
mm
1,3 1,35 0,8 0,8
Consum
Consumption
(15°C, 1013 mbar)(G.N.= m
3
/h) (LPG kg/h))
massimo
max
3,28 2,54 2,45 2,41
Comutare gaz
Aparatul poate fi reglat astfel încât să fie utilizat cu Gaz
lichefiat (G30-G31) în loc de gaz metan (G20) sau invers.
Reglarea va fi efectuată de un tehnician calificat folosind un
kit special.
Gas Changeover
The appliance may be adjusted so that it may be used with
Liquid Gas (G30-G31) instead of methane gas (G20) or vice-
versa. The adjustment must be performed by a Qualified
Technician using the special Kit.
Gas setting table