/ 9
Advice for the installer
This appliance is designed to produce hot water for
domesticuse.
It should be connected to a distribution network for
domestic hot water that must be compatible with its
performanceandpowerlevels.
Theuseoftheapplianceforpurposesotherthanthose
specied is strictly forbidden. The manufacturer cannot
beheldresponsibleforanydamagecausedbyimproper,
incorrectandunreasonableuseoftheapplianceorbythe
failuretocomplywiththeinstructionsgiveninthismanual.
Installation, maintenance and all other interventions
mustbecarriedoutinfullconformitywiththegoverning
legal regulations and the instructions provided by the
manufacturer.
Incorrect installation can harm persons, animals and
possessions; the manufacturing company shall not be
heldresponsibleforanydamagecausedasaresult.
The applaince is delivered in a carton. Once you have
removedallthe packaging,make suretheappliance is
intactandthatnopartsaremissing.Ifthisisnotthecase,
pleasecontactyoursupplier.
Keep all packaging material (clips, plastic bags,
polystyrenefoam,etc.)outofreachofchildrenasitmay
presentapotentialhazard.
In the event of a fault and/or malfunction, turn the
applianceoff,turnoffthegascock,removethebatteries
anddonotattempttorepairityourself.Contactaqualied
professionalinstead.
All repairs, which should only be performed using
originalspareparts,shouldbecarriedoutbyaqualied
professional.Failuretocomplywiththeaboveinstructions
could compromise the safety of the appliance and
invalidateallliabilityonthepartofthemanufacturer.
Intheeventofanymaintenanceorotherstructuralwork
intheimmediatevicinityoftheductsoruegasexhaust
devicesandtheiraccessories,switchOFFtheappliance
removethebatteriesandshuttingoffthegascontrolvalve.
When the work has been completed, ask a qualied
techniciantochecktheefciencyoftheductingandthe
devices.
THE INSTALLATION AND FIRST IGNITION
OF THE APPLAIANCE MUST BE
PERFORMED BY QUALIFIED PERSONNEL
IN COMPLIANCE WITH CURRENT NATIONAL
REGULATIONS REGARDING INSTALLATION,
AND IN CONFORMITY WITH ANY REQUIREMENTS
ESTABLISHED BY LOCAL AUTHORITIES AND
PUBLIC HEALTH ORGANISATIONS.
TurntheapplianceOFFandremovethebatteriestoclean
theexteriorpartsoftheappliance.
Cleanusingaclothdampenedwithsoapywater.Donot
useaggressivedetergents,insecticidesortoxicproducts.
If the appliance is used in full compliance with current
legislation, it will operate in a safe, environmentally-
friendlyandcost-efcientmanner.
If using kits or optional extras, make sure they are
authentic.
WARNING!!
Water with a temperature higher than 50°C
can cause serious burns.
Always verify water temperature before use.
WARNING!!
NEVER TAMPER WITH OR DECOMMISSION
THE FLUE GAS SENSOR. THIS COULD
AFFECT THE PROPER OPERATION OF THE
APPLIANCE.
POOR DRAUGHT CONDITIONS COULD
CAUSE EXHAUST GAS BACKFLOW INTO
THE INSTALLATION ROOM.
HAZARD OF CARBON MONOXIDE
INTOXICATION
WARNING!!
The device must be activated only in
presence of water in the exchanger.