EasyManua.ls Logo

Ariston HB 50 A.1 IX - Getting Started; Initial Oven Start-up

Ariston HB 50 A.1 IX
56 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
GB
The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least half an hour. Ensure that the room is well
ventilated before switching the oven off and opening
the oven door. The appliance may produce a slightly
unpleasant odour caused by the burning away of
protective substances used during the manufacturing
process.
Starting the oven
1. Select the desired cooking mode by turning the
SELECTOR knob.
2. Select the desired temperature with the
THERMOSTAT knob. See the Cooking advice table for
cooking modes and the suggested cooking
temperatures (see Cooking Modes).
3. The THERMOSTAT indicator light indicates that the
oven is heating up to the temperature set.
4. You may do the following during cooking:
- change the cooking mode by turning the SELECTOR
knob
- change the temperature by turning the THERMOSTAT
knob
- stop cooking by turning the SELECTOR knob to the
0 position.
Never put objects directly on the oven bottom to
avoid damaging the enamel coating.
Always place cookware on the rack(s) provided.
Start-up and use
Oven light
It goes on when selecting
& with the SELECTOR
knob. It remains on when a cooking mode is selected.

Related product manuals