20
OPERATION AND FUNCTIONS
INPUT Control Object
1. Temperature Control Buttons 88 Display LED
CONTENTS REMARKS
1. How to start
1) Press "crushed ice" button 5 times while pressing "water" button at the same time.
2) Push "super freeze" button 5 times while pushing"freezer set" button at the same time.
2. Display
Error code is displayed on 88 Display LED.
3. How to stop
1) Push "reset water filter " button 1 time.
2) It stops automatically in 4 minutes from the start.
4. All the error Codes are reset if they turn to be normal.
5. Error Code
ERROR CODE CONTENTS
F1
r1
F-sensor ; disconnection, short.
R-sensor ; disconnection, short.
rt
RT-sensor ; disconnection, short.
D-sensor ; disconnection, short.
dr
d1
R-Door Switch ; defective
dF
F-Door Switch ; defective
dH
Homebar (Refreshment Center) Door Switch ; defective
C1
Cycle ; abnormal or defective.
F3
E1
EF
Et
Return after defrosting ; abnormal or defective
I senser ; defective
F senser ; defective
Horizontal switch ; error
E9
Water supply ; error
Micro switch ; error
ES
EA
Drop the ice while Et
Eu
Co
d2
Full ice switch ; error
Display Full-Down mode
Display forced defrost mode for A/S
3-7. Error Display (LED Display of Front PCB)
To Next Page
Loading...
Need help?
General
