GB
/ 35
1.2 Smart Display
The air conditioning unit has a display which enables viewing of
the operating parameters (see fi gure).
•
Led
- Indicates the temperature set in normal operating con-
ditions.
- displayed for 3 seconds on activation of TIMER, SWING,
TURBO or SILENCE.
- displayed for 3 seconds on deactivation of TIMER,
SWING, TURBO or SILENCE.
- is displayed during SELF CLEAN operation.
- is displayed during preheating of the refrigerant, by
regulating the fan on the internal unit, until the gas reaches
23°C. This operation is used to avoid blowing cold air into the
room in the fi rst few seconds of operation.
- is displayed for 15 seconds when the air conditioning
unit reaches 240 hours of operation, to indicate the need
to clean the air fi lters. At each new start-up, the message is
repeated until the internal counter is manually reset by pres-
sing the LED button on the remote control 4 times. This ope-
ration can be carried out only during the 15 seconds in which
the message is displayed.
- is displayed for 15 seconds when the air conditioning
unit reaches 2880 hours of operation, to indicate the need to
replace the special fi lters. At each new start-up, the messa-
ge is repeated until the internal counter is manually reset by
pressing the LED button on the remote control 4 times. This
operation can be carried out only during the 15 seconds in
which the message is displayed.
- is displayed when the air conditioning unit is in Access
Point mode, for confi guring the Wi-Fi module.
- appears during antifreeze mode
- appears sequentially and 2 times the
setting temperature, it means the “ECO” function is activated.
- WiFi can be observed when Wi-Fi function is operating
and the air conditioner is connected to the household inter-
net wireless. (only with Wi-Fi kit, to be purchased separately)
DISPLAY
TEMPERATURE
WiFi
To Next Page
Loading...
