Aritech ATS3000 Quick Programming Guide

12 ATS4000 Installation and Quick Programming Guide
4. Data Panels 1. DGP to be polled 1. DGP type
0. Standard
1. Door Controller
2. Lift Controller
1. Select the area to program2. Area Database
3. Arming Stations
1. Area name
2. Exit time
4. Siren event flag
5. Area disarmed event flag
1. RAS to be polled
1. Area alarm group
2. Menu alarm group
3. Door event flag
4. Output controller
5. LCD arming station
6. Toggle keyboard control
7. ENTER key opens door only
8. Door event flag on alarm codes
9. Display shunting on LCD
10. Arm/disarm using one key
11. Cards auto disarm
12. Card alway arm/disarm
13. Reset from RAS without code
14. Alarm group restrictions to disarm only
15. Enable entry/exit buzzers
6. Area active event flag
7. Inhibited event flag
8. Armed alarm event flag
9. Disarmed alarm event flag
10. Local Alarm event flag
11. Exit timer event flag
12. Entry timer event flag
13. Warning timer event flag
14. Camera event flag
15. Pre-Alarm timer event flag
16. Out-Of-Hours timezone
17. Area Disarm time
18. Voice report message
19. Report to Central Station 1
20. Report to Central Station 2
21. Report to Central Station 3
22. Report to Central Station 4
23. Enable audio listen in
24. Enable exit fault
25. A&B Alarm reporting (ACPO only)
26. Disable arming if all inputs inhibited
2. RAS detail
16. Timed lockout
3. Entry time

Aritech ATS3000 Specifications

General

Brand	Aritech
Model	ATS3000
Category	Control Panel
Language	English