5CS-175-275-575 Series • LCD User Guide
LCD keypad
a
Power (green). The power light is on if the system is
connected to the mains and if the battery is okay. The
power light will flash if the system has a low battery condition
or when the battery is not connected. The power light is off if
the mains is cut.
b
Ready (green). The ready LED is on when the system is
ready to arm, and flashes when the system is ready to
force arm. If the LED is off, the system cannot be armed,
generally because there is a zone fault.
c
Fire (red). When the fire LED is lit, a fire zone has been
activated. A rapidly flashing fire LED means that there is a
problem with the fire zone.
g
Stay. This function key part arms your system. Pressing it
disarms all interior zones but leaves the perimeter
protected.
h
Away. Press to arm all zones before leaving.
i
Bypass. Press to bypass (exclude) zones.
j
k
Navigation keys. These allow you to scroll
through lists and options on the LCD display.
l
Chime. Press to turn the chime on and off.
@
Hash key. Used to access modules and locations.
$
Star. Used to access tasks and enter data.
To Next Page
Loading...
Need help?
General
