Need help?Do you have a question about the Aritech CS450 and is the answer not in the manual?
Explains how to navigate menus using arrow keys and accept/cancel functions.
Turns on the entire alarm system.
Turns on the system without an exit time, keypad cannot be in the guarded area.
Arms part of premises, leaving some areas unarmed.
Arms part of premises, leaving some areas unarmed, different from Partguard 1.
A mechanical switch to arm/disarm the system without a code.
8 codes can be assigned, each with a unique number.
Disarms system and sends alarm message when forced.
Used by installer; Code 8 can be normal or temporary.
Allows the user to turn on the alarm system.
Allows the user to turn on partguard 1.
Allows the user to turn off the alarm system.
Allows the user to inhibit zones.
Allows advanced functions like code changes and log viewing.
How to arm the system using the mechanical keyswitch.
Explains the meaning and action for keypad LED lights.
Steps to take when the system loses mains power.
To Next Page
General