CS450 User Manual 37
Forced Arm Switches on the alarm system when
a number of zones are open without
inhibiting each one individually.
Inhibited
Zones
Zones that are left open when the
rest of the system is armed. They
can be entered without triggering an
alarm.
KeySwitch A mechanical device that can turn
the system on or off without a code.
Operator Log A temporary log which contains all
the alarms and faults between two
armings. It is deleted after every
arming.
Partguard 1 Sets the alarm system to guard part
of the premises in the day.
Partguard 2 Sets the alarm system to guard part
of the premises in the night.
Tamper
If the alarm system is interfered with
a tamper is recorded. You will not
be able to arm the alarm system
again until you have contacted your
installer.
Zone An area guarded by a group of one
or more detection devices .
To Next Page
Loading...
Need help?
General