CS450 User Manual 31
Using the Keyswitch
• This is a mechanical switch which can turn the
system on and off without a code.
• Information on faults and alarms appears on the
keypad.
Turning on the Alarm System
Go to the key switch.
OK
Check whether the “System OK”
LED is on.
If this LED is not on, check the
keypad for a fault.
ON
The system can now arm.
Turn the key switch to the ON
position.
Beeep
The beeper begins to beep. The
exit time has begun.
Leave now.
ON
The “System ON” LED shows that
the system is armed.
To Next Page
Loading...
Need help?
General