14 CS450 User Manual
Inhibiting Zones
• Sometimes a fault can occur in your alarm system
which leads to an Open Zone message on the
display.
• The system cannot be armed until all open zones
are inhibited.
SYSTEM ARMING
OPEN ZONE(S)
03 HALL
Press to start inhibiting
INHIBIT ZONE ___
Press w(the number of the zone)
03 HALL
IS INHIBITED
SYSTEM ARMING
LEAVE NOW
SYSTEM ARMED
Note:You must inhibit the open zones each time
you turn on the alarm system until the fault is fixed.
To Next Page
Loading...
