Need help?Do you have a question about the Aritech CS-275 Series and is the answer not in the manual?
Arms perimeter protection while keeping interior zones disarmed.
Arms all system zones for maximum security.
Allows exclusion of specific zones from arming.
Displays zone status, allowing bypass for faulty zones.
Arming the system using pre-programmed function keys (Stay/Away).
Arming the system by entering a user code.
Procedure to disarm the security system using a user code.
Action to take when an alarm occurs in a specific zone.
Resets the system after an alarm, making it ready for arming.
Initiates a fire alarm and sends a message to the central station.
Sends a medical alert to the central station.
Sends a personal attack alert and may activate sirens.
Procedure for managing alarm messages after a fire alarm.
Accesses stored fire alarm memory for review.
Resets the system and fire detector after an alarm.
Accesses the system to change user codes.
Requires entry of a master user code for security.
Specifies the two-digit ID for the user code being changed.
Inputting the new code for the specified user ID.
Accesses the system to delete user codes.
Requires master code entry to proceed with deletion.
Specifies the two-digit ID of the user code to be deleted.
To Next Page
General