To Next PageTo Next PageWhat to do if the green lamp on the Arjo AtmosAir 4000 pump doesn't light?
If the green lamp on the pump isn't lighting up, start by checking if the power cord is securely plugged in. Also, verify that the wall outlet isn't controlled by a switch and that the circuit breaker hasn't tripped. If these steps don't resolve the issue, it's possible that the power cord or switch is damaged.
Why is my Arjo AtmosAir 4000 mattress inflating only to one side in rotation mode?
If your mattress is only inflating to one side, make sure the red hoses are connected to the hoses marked with a red tag for rotation. Also, inspect the tubing inside the mattress for any kinks or disconnections. Finally, check the deflated rotation bladder for any holes.
What to do if my Arjo Medical Equipment mattress is not firm?
If the mattress isn't firm, check the tubing inside for loose connectors, kinks, or disconnections. Also, check the SAT system for holes or damage.
Why is my Arjo AtmosAir 4000 Medical Equipment mattress too firm upon arrival?
If the mattress is too firm upon arrival, it could be due to a difference in altitude. Try applying weight to the mattress to open the valves. It's also possible that the internal components need time to adjust to the environment; allow the mattress to accommodate for 24 hours.
General| Usage | Prevention and treatment of pressure ulcers |
|---|---|
| Weight Capacity | Up to 250 kg (550 lbs) |
| Pressure Adjustment | Adjustable pressure settings |
| Alarms | Low pressure, power failure |
| Type | Alternating pressure mattress system |
| Technology | Active Pressure Redistribution |
| Power Supply | 100-240V, 50/60 Hz |
| Therapy Modes | Alternating Pressure |
| Cell Material | Nylon/Polyurethane |
| Cover Material | Vapor Permeable PU |
| Dimensions (Pump Unit) | 12" x 8" x 5" (30 cm x 20 cm x 13 cm) |
| Cycle Time | Adjustable cycle time |
| Warranty | Typically 1-2 years (varies by region) |
