Do you have a question about the Arjo Parker and is the answer not in the manual?
Explains WARNING, CAUTION, and NOTE symbols used in the manual.
Guidance on reporting serious incidents involving the medical device.
Contacting Arjo for service, support, and replacement parts.
Requirements for safe use, including caregiver training and understanding IFU.
Criteria for assessing patient suitability for the bath prior to use.
Therapeutic uses of the bath for pain relief and tissue healing.
Mentions installation by trained personnel and expected equipment life.
Crucial warnings regarding modification, incompatible parts, hazardous environments, and unattended use.
Requirements for the installation site, floor, and attachments.
Steps for initial setup including checks, installation, and disinfection.
Routine checks and disinfection procedures to be performed before each patient use.
Lists and identifies all parts of the Parker bath system.
Details the LEDs, displays, and buttons on the control panel and their functions.
Explains the functions of the primary hand control for bath operation.
Describes the operation of the optional hand control for entertainment features.
Explains the drain knob, auto fill feature, and temperature displays with scalding protection.
Details the emergency stop, shower handle operation, function lock, and door lock mechanisms.
Information on the optional Air Spa and Sound & Vision systems.
Describes the integrated disinfection unit and the battery back-up system.
Details available accessories for enhanced patient comfort.
Steps for filling the footwell with water and ensuring upright position.
Guidance on opening the door, adjusting height, and seating the patient safely.
Instructions for showering the patient and managing water temperature.
Using the Air Spa system and steps to end the bathing cycle.
Procedures for cleaning and disinfecting the bath after patient use.
Detailed steps for transferring a patient using a Sara 3000 lift.
Steps for bathing the patient and subsequent procedures.
Steps for transferring a patient using a ceiling lift into the bath.
Procedures for bathing the patient and disinfecting the bath.
Information on Arjo disinfectants, safety precautions, and accessory use.
Measures to limit bacterial growth during installation.
Daily use practices to prevent bacterial formation and contamination.
Step-by-step guide for replacing the disinfectant bottle.
Steps to clean and rinse the bath to remove visible residue.
Detailed steps for cleaning internal and external surfaces of the bath.
Steps for spraying disinfectant on surfaces, drain, and allowing contact time.
Steps for initial cleaning and rinsing before disinfection.
Detailed procedure for applying disinfectant using the spray handle.
Specific steps for disinfecting Air Spa system jets.
Initial steps for using the MultiClean system for disinfection.
Specific steps for disinfecting the Air Spa system with MultiClean.
Final cleaning and disinfection steps after the last bath of the day.
Outlines the schedule for routine maintenance checks.
Tasks caregivers must perform weekly and monthly.
Annual maintenance tasks requiring certified technicians.
Solutions for issues with controls, power, and basic functions.
Addresses problems with optional systems and specific functions.
Physical dimensions, weight, and general operating parameters.
Details on motion, sound levels, battery, and IP classification.
Information regarding the disposal of the bathtub at the end of its lifecycle.
Covers site preparation, allowed combinations, and operating conditions.
Details electrical data for the equipment.
Details water supply requirements and temperatures.
Defines the meaning of various labels on the equipment.
Explains the meaning of safety and operational symbols used.
Lists relevant safety and regulatory standards the product complies with.
Information on RF emissions and the electromagnetic environment for use.
Details on immunity to electrical and magnetic disturbances.
Lists and illustrates available parts like cushions and leg rests.